Quick Answer: What Does IP Address 0.0 0.0 Mean?

The meaning of IP address

In Internet lingo is called wildcard address or unspecified address.

IETF defines it as “source address for this host on this network.” If we talk about servers, means all IPv4 addresses on the local machine.

In the case of a route entry, it means the default route.

What does the IP address 0.0 0.78 refer to?

Short Bytes: The IP address signifies different uses at different places. Usually, it’s a non-routable meta address that’s not bound to any particular remote address. Dealing with servers, it means all IPv4 addresses in the local machine. In route entry’s context, it usually means the default route.

What does IP address 0 mean?

An IP address ending in .0 is perfectly legal these days. However, some devices (and firewall policies) believe that it isn’t. In the old “classfull” addressing scheme, IPs from to were considered “class C” space, i.e. they had an implicit subnet mask of

What does a gateway of 0.0 0.0 mean? has the specific meaning “unspecified”. This roughly translates to “there is none” in the context of a gateway. However, sticking to your question, yes, it does have a special meaning. It means that the network is locally connected on that interface and no more hops are needed to get to it.

What does the 0.0 0.0 0 mean in a routing table? represents all possible IP addresses. In the context of the way routing tables get set up by default on AWS, is effectively “all non local addresses”. This is because another route presumably exists in the routing table to route the VPC subnet to the local network on the VPC.

What DNS 8888?

Service. Google Public DNS operates recursive name servers for public use at the IP addresses and for IPv4, and 2001:4860:4860::8888 and 2001:4860:4860::8844, for IPv6. The Google service correctly replies with a non-existent domain (NXDOMAIN) response. The Google service also addresses DNS security.

Why 0 and 127 are not used in IP address?

The class A network number 127 is assigned the “loopback” function, that is, a datagram sent by a higher level protocol to a network 127 address should loop back inside the host. No datagram “sent” to a network 127 address should ever appear on any network anywhere.

Can IP address contain 0?

Valid IP addresses can certainly have a 0 in them. To provide a very simple answer: One or more zeros in an ip address are perfectly valid for host addresses as long as those addresses are not the network or broadcast address. Network and broadcast addresses are valid ip addresses, they’re just not usable by hosts.

Can an IP address start with 0?

Why can’t IP addresses start with 0 or 255? It was specified somewhere (presumably in an RFC) that Class A addresses range from 1-126 in the first octet, and that class E addresses range from 240-254, but that leaves out two potential networks on either side, namely a 0 and a 255 network.

What is the 32 after an IP address?

The /32 references the explicit IP address you’ve given, while the /24 references a range of IP addresses. The number ( is an IP(v4) address typically given to LAN routers.

What does IP route 0.0 0.0 0.0 0.0 mean? means to all subnets. The first means the actual subnet, in this case any and the second means the subnet mask, also any. If you have specific routes as follows: ip route a.b.c.d.

What is the default gateway IP address?

Default gateway. From Wikipedia, the free encyclopedia. A default gateway is the node in a computer network using the internet protocol suite that serves as the forwarding host (router) to other networks when no other route specification matches the destination IP address of a packet.

What do you mean by default gateway?

A default gateway serves as an access point or IP router that a networked computer uses to send information to a computer in another network or the internet. Default simply means that this gateway is used by default, unless an application specifies another gateway.

What does an IP address of 0.0 0.0 mean?

In the context of a route entry, it usually means the default route. In the context of servers, means “all IPv4 addresses on the local machine”. If a host has two ip addresses, and, and a server running on the host listens on, it will be reachable at both of those IPs.

Why default route is used?

In computer networking, the default route is a setting on a computer that defines the packet forwarding rule to use when no specific route can be determined for a given Internet Protocol (IP) destination address. All packets for destinations not established in the routing table are sent via the default route.

What is the ip route command?


Step 3ip route {ip-prefix | ip-addr ip-mask} {next-hop | nh-prefix | interface} [tag tag-value [pref] Example: switch(config-vrf)# ip route ethernet 1/2
Step 4show ip static-route vrf vrf-name Example: switch(config-vrf)# show ip static-route

3 more rows

Can I use 8.8 8.8 DNS?

Google Public DNS represents two IP addresses for IPv4 – and is the primary DNS, is the secondary one. Google DNS service is free to use and can be used by anyone who has access to the Internet.

Is it faster to use Google DNS?

Faster than Google and OpenDNS

Google also has a public DNS ( and for IPv4 service, and 2001:4860:4860::8888 and 2001:4860:4860::8844 for IPv6 access), but Cloudflare is faster than Google, and faster than OpenDNS (part of Cisco) and Quad9.

Which is the fastest DNS server?

Best Free & Public DNS Servers (Valid June 2019)

  • Google: &
  • Quad9: &
  • OpenDNS: &
  • Cloudflare: &
  • CleanBrowsing: &
  • Verisign: &
  • Alternate DNS: &